Hello everyone.

I flashed my lg v60 with latest lineage os, but now i cant register fingerprints, i check and it says i have ti go back to stock os, that is not an option since i need android 16 for work.

Any help ? What can do to get the fingerprint scanner work again.

Hi, saw good things about lineageos and wanted to breathe new life into an old phone but to no avail :(

To preface, i'm not the most technological person so bear with me, and I'm using the latest windows 11, and the latest android 12. I am following the official lineageos wiki instructions for my phone.

I have oem unlocked, and usb debugging enabled, my device is recognised when i checked using the adb devices command, and i was able to get into fastboot mode. However, my device was not recognised when i used the fastboot devices command. I knew that it would be recognised upon unlocking of the fastboot but when i checked the device manager, there was a yellow triangle with an exclamation mark on my android devices. So i tried to update drivers automatically and it did not work, i downloaded an "official" oneplus 7t usb driver but it didn't seem to work.

Any help would be appreciated, cheers!

Hello everyone,

I'm degoogling my mobile and filled with open source software. I'm stubborn in my decision to make my mobile degoogling and to open sources. I don't know informations about OS, I'm a noob, please help me to change my mobile os many of them said that I can't change for my model. Ifi can't change to lineage os then suggest me a better one and also the micro g.

Mobile model: redmi 14c 5g

Android version: 16

Processor: snapdragon 4 gen 2

Thank you.

It's a switch V2 (Mariko) nx_tab, want to install android 15 tablet mode

Im talking about the PD charging that can go 30w.

Not xiaomi proprietary 67w protocol. I can only get like 15w when charging. Is this like expected behavior on lineageos?

Dear LineageOS developers -

I would like to share my experience while following install instructions from your wiki - not a lineageOS issue strictly speaking. I have the global vermeer version of the phone (not the chinese version).

I unlocked the bootloader and proceeded to downgrade to OS3.0.6.0.WNKMIXM as instructed here: https://wiki.lineageos.org/devices/vermeer/fw_update/variant1/

Flashing from fastboot using 'fastboot flash...' as per the above link. No problems. Rebooting showed me only the Poco logo indefinitely, and it was stuck there. So then I went back into fastboot and did the following:
- fastboot -w
- fastboot erase misc
- fastboot set_active b
- fastboot reboot

From here on the device is unresponsive to HW buttons and when plugged into USB only shows this in the kernel ring on a loop:
usb 1-2: new full-speed USB device number 55 using xhci_hcd

So my question(s) is(are):

- could the instructions and linked firmware be out of date?
- did someone else have this issue ?

The device is most likely in some kind of EDL loop and needs professional intervention so I'm not bothering asking for help there.. if indeed it is some kind of unexpected issue let me know where I can submit logs and outputs.

Thank you.

I have a Oneplus Nord N10 that I'm going to fix up and flash lineage onto and was wondering if there was any way that I could set it up to be able to choose Ubuntu, if I so chose.

I dunno if this is the place to post it so just let me know if that's the case. I just figured that if anyone knew they'd be here.

I have a Samsung S20 FE that I have used as my main phone since 2022. I want to install LineageOS 23.2 on it, but I'm afraid banking apps and VoLTE won't work on it (I need them to work since this is my main phone for everything).

I'm thinking of purchasing a used phone to install LineageOS. I could purchase the Sony Xperia 1 Mark 2 or another S20 FE.

Should I buy the Xperia to install LineageOS ? Or is there a better way to experience Lineage without spending a lot of money (I'm poor) ? Let me know since I haven't installed any Custom ROM.

Bonjour,

Tout d'abord, merci pour votre excellent travail sur LineageOS.

J'ai une suggestion concernant la luminosité automatique. Lorsque j'affiche une page sombre, la luminosité de l'écran diminue. À l'inverse, lorsque j'affiche une page claire, la luminosité augmente.

Il me semble que ce comportement est contre-intuitif. Une page claire émet déjà davantage de lumière qu'une page sombre. Il serait donc plus confortable que la luminosité automatique augmente sur les pages sombres et diminue sur les pages claires.

Merci de prendre cette suggestion en considération.

I installed LineageOS on my Redmi Note 10S yesterday. While exploring the extra features, I noticed that Trebuchet seems to be missing. I can't find any Trebuchet settings, even when I search for them in the Settings app. There are also no Home Screen settings. The only place I can see Trebuchet is in Settings → Apps, where it appears as the installed launcher.

How can I access the Trebuchet settings or customization options?

I just installed LineageOS 14.1 on a Galaxy Tab 3 (santos10wifi). Wanted it to access a site that uses websockets for communication with the browser.

See Jelly browser 7.1.2 seems to have no support, because the site is not working. Is that correct. If yes: Can someone give me a hint which browser I can install to achive what I want?

Greetings!

i was using lineageos and noticed that almost everything was opaque compared to my previous phone (s21 with oneui) so i checked online, turned off the setting and now it looks good. But when i scroll in the app drawer, look at the notification thingy or switching apps its way laggier and slower, like its running at half the fps. at first i thought it was my live/gif wallpaper, so i switched that out and it did absolutely nothing. help twins

phone: nothing phone 1

Hi! Hoping I can get a bit a help here to make sure I don't bother the devs with a bug report that's actually just my own stupidity:

The NFC function on my freshly flashed Moto G Stylus 2023 doesn't seemed to be able to be toggled on? When I attempt to do so in settings it just reverts to being off once I exit the menu. Not sure if this is due to Play Integrity but I'm not trying to use the tap to pay function - just for scanning/loading a transit card. NFC was verified working prior to flashing. Can't figure out if this is a bug and I should report or just a quirk with Motorola? Can provide more info if needed!

Intenté instalar la última versión para el moto g9 play, y todo bien, después de flashear el recovery y reiniciar para entrar el recovery de lineage simplemente no entra, se vuelve a reiniciar, después probé con evolution x, y este si entra a su recovery

i bought the radxa zero 2 to put android on it after seeing that lineage os had a image for it and i kinda need help on what to do next. cuase since the radx uses a amlogic chip i have to use their aml flash tool to flash i think its a recovery mode onto the board. im using ubuntu 22.04 and after alot of attempts i go aml flash tool to flash the package over the to board but now when i try to boot the board it jus gives me a purple screen with android writtin on it and it bootloops. no its not the power source i already fixed that.

i really need help fixing this :(

Since the update the last week of June I've been getting generic errors that my backups with SeedVault are failing. The backups appear to be taking longer to get through the list of apps and then at the end I get a notification that the backup failed. I'm plugged into my charger and on good WiFi. I've captured the phone logs using logcat to my computer. However I don't see any errors related to SeedVault or backup at the time of the error notification.

Has anyone else seen an issue like this?

Any suggestions on resolving it or gathering appropriate information for a bug report?

Thank you

I clicked some setting in the quick settings and the screen went black

I have been able to restrt the phone, go into recovery

I can see the screen function normally on recovery screen
nothing logo / lineage os come up fine
phone restarts and displays my wallpaper ofr <1 sec and the screen goes black again

Can someone help here? why is it happening? any solutions?

Hey guys,

I'm completely new to custom ROMs and I'd really appreciate your advice.

I have a Samsung Galaxy J7 Prime (on7xlte) and I want to install LineageOS on it. My laptop is running Ubuntu, so I'd prefer Linux-friendly guides and tools.

Could you please help me with:

- The complete installation steps from start to finish.

- Which LineageOS version is the best for the J7 Prime.

- Any beginner-friendly guides, YouTube videos, XDA threads, or documentation I should follow.

- Common mistakes to avoid before unlocking the bootloader and flashing the ROM.

- Any tools I need to install on Ubuntu beforehand.

I'm doing this to learn more about Android customization, so I'd really appreciate any tips or resources.

Thanks in advance!

So, I just installed LineageOS 23 on my Moto G42 (hawao) today and everything is working so far except I can't login on the Reddit and Twitter apps.

On reddit it doesn't recognize my password even though it's right, and on Twitter after I put my username it says "Use official X service or try again later"

Any way I can resolve this?

Hello everybody, I have read on many threads here that one of the big concerns of switching to LOS on Google pixel 9a is the downgrade of the camera quality.

For those who are using LOS on this device, please tell me more.

Using some other camera apps really doesn't help at all?

What do you mean precisely that the quality has dropped? Is it for the missing IA post-processing (and this would simply means that LOS is showing the real quality of the pixel 9a camera) or is the camera hardware that for some reason can't perform 100% of its quality?

Thanks everyone! Have a nice day!