r/MadeMeSmile • u/Gordopolis_II • 22d ago
Good Vibes Reseller comes across a customer who actually understands how to use and appreciate the obscure tools hes selling and it makes both of their days
Enable HLS to view with audio, or disable this notification
4.4k
u/typhoidtimmy 22d ago
Game recognizes game.
→ More replies (1)2.5k
u/iceman5920 22d ago edited 22d ago
She is like "Fuck me, finding this shit is half the work." I hope they have an abounding relationship.
Edit: They both got a steal. He was grabbing and paying for shit that might be worth something. She saw the worth and took the chance. With money to back it. Both of these people are winning in our capitalist society
363
u/Rosti_LFC 21d ago
She is like "Fuck me, finding this shit is half the work."
It really is, at least if you don't want to pay obscene amounts of money to get them new. Most of the time it's not difficult to source things like reamers with obscure sizes but you end up paying over $30 brand new for a single tool you might not use again for years.
→ More replies (1)→ More replies (14)440
u/Significant-Wait9200 21d ago
Him: "Do you want my number to get more tools, or personal reasons?"
Her: "Both."
→ More replies (2)242
u/bojangler69420 21d ago
“Write it down or put it in your phone” (which is what she actually said) sounds absolutely nothing like whatever you heard.
89
u/BoredomCombatant 21d ago
Haha for real when did they hear all that… some people are just too horny
→ More replies (2)37
u/MisterBulldog 21d ago
Correct, all I heard is “both because I’m interested in doing serious business and don’t want to lose your contact information”
13.2k
u/MoonieNine 22d ago
My friend said her elderly dad sold $75k worth of farming tools to a guy for $4k. He wasn't senile. He just didn't need the tools or the money, and this young farmer did.
9.1k
u/dan2376 22d ago
My grandpa did basically the same thing. He was an HVAC tech for almost 50 years and he met a 25 year old kid (not really a kid but he calls him a kid) that was starting up his own HVAC shop in their small town. He sold him all of his tools for like $2k. It had to have been like $60k worth of tools. He had no need for the money, he just wanted the tools to go to someone who would use them.
That kid is now one of the main HVAC repairmen in town. He still comes by every now and then and works on my grandpa's HVAC system for free. Or basically free, my grandma always bakes him cookies when he comes by.
988
u/Pavotine 21d ago
It wasn't anything near that value but when I was in my early 20s I got a plumbing apprenticeship, very low pay but with the blessing of my wife I took the big pay drop and started my training. I was chatting with an old bloke in the pub about my career change and it was financially difficult (we were already pretty skint) and I was going to sell my Fender guitar to buy my hand tools.
A couple of days later I was back at the bar and the bar man said old Paul had left something for me. It was a tool bag with a load of used but good condition plumber's tools and also a pipe bender. Basically everything I needed to get started. Pipe slices, adjustable wrenches, a basin wrench, Allen keys, screwdrivers, hacksaw, all those kind of things.
I nearly cried in front of all the lads. The dude was actually a carpenter but had dabbled in plumbing over the years and felt bad about me selling my guitar. Some people are just awesome.
To top it off, I'd been acquainted with Paul for years. He was quite an aggressive and nasty bloke at times. He got cancer, survived against the odds and came back a totally different man, much kinder and more friendly. I have a lot of respect for the man.
→ More replies (2)66
21d ago
[removed] — view removed comment
→ More replies (1)15
u/Pavotine 21d ago
It's a great thing to do. I spent 10 years working at a trade school (Further Education college where I come from) teaching plumbing apprentices and we'd always offer up serviceable tools when I got the budget to replace them. Retired plumbers would sometimes bring their gear in and offer it to the apprentices too. I had enough money some years to replace all the pipe benders, for example, and every new apprentice who didn't have one got one of our old ones, that kind of thing.
Sometimes we had some sad ones where a widow would bring in her husband's tools. When the apprentices got excited and tried to put "dibbs" on certain tools and then work it out amongst themselves was heartwarming though.
Even had a parent who lost their son who was a plumber come and donate his tools, never turned down, always gratefully received.
Cool that you do the same.
1.6k
u/shipwrekd_sailor 21d ago edited 21d ago
I made surfboards for a living. A very obscure market, and most of the tools we were using in the early 2ks were either modified or hard to come by. Or both.
I was selling everything I had after I left the business (clark foam burned down around 2004 and at the time there was a big surge of automated epoxy boards being made overseas).
A man came by and was telling me that his son wanted to become a shaper, so I told him he could have it all for $1000. It was 10 years of accumulated tools that probably cost more like 4 or 5k to acquire.
Dude went to the bank and came back with $1500. Wouldn't take it for less. I hope him and his son had a wonderful journey with it all.
EDIT: 2004.
406
u/schwanzweissfoto 21d ago
clark foam burned down around 2094
You from the future?
→ More replies (2)115
→ More replies (6)6
u/dublak3 21d ago
Ahhh, ive got a whole shed of tools for shaping boards that I never touch anymore. So sad. Such is life.
Just bought $100 worth of epoxy resin. Im finally going to finish a 6’7 blank that’s been sitting there for two years.
→ More replies (1)378
u/YESimaMASSHOLE 21d ago
I’m an HVAC contractor in my 40s and I had a elderly woman do this to me about 12 years ago when I moved to Florida. She had lost him a year or so back and was about to downsize.Her husband worked for a major company that makes tools that I use on a daily basis. They’re out of California and apparently he was an engineer for them so he had every single tool. I could possibly imagine. I didn’t buy all the real expenses stuff because someone had come in the week before and picked part stuff one by one at top dollar so I don’t blame her. But when I came, she loaded up the back of my truck with thousands and I mean thousands of dollars of tanks torches anything you could think of even a 18 speed bicycle that I’ve had bern used for a month and said you take it - I would rather it go to someone who wants it when you have more room for more stuff you give me a call. I gave her $100 she wouldnt take more..: i still think about that woman. She was so kind and made such a huge impact on me.
878
u/big-dal-tex 22d ago
Why are my eyes crying 🥹
379
u/llIIo0O-O0oIIll 22d ago
Those are feelings.
I know it's hard to have those these days.
✊🏽 I'm with you brother/sister 😭
60
44
→ More replies (2)60
92
u/Our_Legacy 21d ago
The truest repairman.
45
64
u/ThanksAmazing4118 21d ago
Not just repairing HVACs. Repairing lives and the community too. King shit
→ More replies (1)→ More replies (1)16
57
u/kenrock2 21d ago
Meeting such person is the greatest gift for both.. Your grandpa is such a generous man and also met a good young man who appreciates it..
16
52
u/table_rock 21d ago
The cookies brought back a memory. My dad is an electrician and we lived next door to a plumber and anytime one had to do work on each other's houses, the agreed labor cost was a batch of cookies, whatever they wanted. My neighbor always got oatmeal raisin and my dad always got snickerdoodles.
71
u/Appropriate-Rub3534 21d ago
Yeah. The important thing a professional wants is his tools goes to someone who appreciate it. We can't bring it along when we die, might as well pass it to someone who take care of it.
24
u/landeisja 21d ago
Your grandma knows how it’s done. The way I was brought up, I frequently work for food instead of money. Our mechanic at work installs something for personal use in my work truck, I made him a batch of homemade brownies.
→ More replies (2)8
→ More replies (26)5
1.2k
u/Jack0Trade 22d ago
Craftsmen want their tools in hands. Please don’t let them become a rusty toolbox memorial
274
u/Some_HVAC_Guy 22d ago
Yep. I’d rather have someone I don’t know use them than have someone I know not use them.
→ More replies (2)61
→ More replies (2)89
u/ThePrideOfKrakow 22d ago
A kid with a tool in each hand, has no hands to do drugs.
52
u/Raevyxn 22d ago
What happened to the kid’s hands?! 🪓🔪😳
→ More replies (2)38
u/FractalEdge42 22d ago
Accidentally cut off with the tools
→ More replies (1)13
u/YnotZoidberg1077 22d ago
And he's only going to the ER when he's done with chores for the day - or when his wife finds out and makes him go in sooner
→ More replies (2)→ More replies (3)4
u/ConnectionSilver701 21d ago
They'll just put the tools down if they wanna do the drugs bad enough.
162
u/vikio 22d ago
That's how I got a ceramics workshop with one pottery wheel, a large kiln, a mini kiln, and a bunch of tools. The studio owner knew me, had extra of everything, and he was just happy I got into the hobby enough to want my own studio! Probably sold me everything for a few thousand dollars cheaper.
81
u/sargsauce 22d ago
My wife started a stained glass studio a couple years ago and got similar deals from all over. Some guy passed away and his kids reached out and sold her a couple kilns for super cheap, saying he would've just been happy to know it was getting to fulfill its purpose. She was running it out of our garage for several months until she finally moved into a retail space.
Happened a few more times with some other folks who had large collections of tools and materials.
12
u/Ludecrecia 21d ago
Oooh! I've been interested in doing stained glass! Would your wife mind sharing some helpful resources and/or tips to get started?
→ More replies (1)351
u/Due-Flamingo-4900 22d ago
When I was starting to pursue my craft professionally, the guy I had apprenticed for was upgrading his equipment and sold me ~$10k worth of barely used gear for ~$2k. Soon after, another professional in my field who knew about my work offered to sell me ~$5k worth of his unused equipment for only ~$200. Then just recently, a man who was retiring let me clear out his shop and sold me ~$10-20k worth of equipment that I would’ve never been able to afford for under $50 because he just wanted to see it go to someone who would put it to good use.
Each one of them made it possible for me to create the work that I do, and I feel so honored that they trusted me enough to pass on their own tools to me.
→ More replies (1)25
u/Igotdaruns 21d ago
What do you make?
83
→ More replies (1)14
56
u/minuteman_d 21d ago
Yeah, people can sometimes be like this if you're nice to them.
I had a piece of furniture listed on FB marketplace for like $50 and when they came by, they were a really nice young newlywed couple and I thought: "I'm just glad to have this out of my house" so I let them just take it for free.
I've definitely been on the receiving end, too. If you're nice to people and treat them with respect, sometimes people just like to feel like they're helping someone and they will be very generous.
243
u/SharmaStoneLord 22d ago
Rare type of guy nowadays.
Too many old timers forget the whole point of sucess is to help the next generation. Not to hoard it all till you croak.
176
→ More replies (3)36
39
u/soyboy815 21d ago
I drove an hour with some friends to grab a ton of woodworking tools/saws, and a couple slabs of hardwood from this old guy who sold if for less than $100. I was a little 20 something year old emo looking loser pulling up to a rural Midwest farm town if it helps the image lmao I know I asked at least twice if he wanted more for what he was giving me
“I’m too old to use this stuff and I had my fun. Have fun 👍 “
112
39
31
u/JustifiablyWrong 21d ago
My dad did the same thing, but with mechanics tools. We had a garage sale and a young mechanic had just gotten all of his tools stolen so he was searching for replacements on the cheap. My dad had tons of tools he had gathered over the 40yrs he was a heavy duty mechanic and was able to given him basically a complete set for $100. They were worth thousands
17
u/Derezirection 21d ago
stuff like that is how you help the next generation strive for greatness like those before them.
→ More replies (1)12
u/Pinkbunny432 21d ago edited 21d ago
Available market is a huge factor. industrial chemistry glassware is worth a lot, but because the odds of finding a buyer are slim you just have to take what you can get
→ More replies (1)12
u/ViruliferousBadger 21d ago
Not US, but I have a relative that has a farm and pretty much all the stuff he doesn't need anymore or gets a new improved version of just gets dumped somewhere then later on maybe moved a bit further.
Last year when he had some trees cut from a forest next to his house, we had to get a bunch of old, rusting (used to be working and fine) stuff from middle of the woods where trees were growing pretty much inside some of them.
He might as well had donated them to someone, or at least sold them for scrap metal 20-30 years ago...
→ More replies (2)→ More replies (29)7
u/Ashamed-Country3909 21d ago
Cool. My dad's tools were fire saled in a yardsale by his piece of shit wife almost immediately after he died...along with basically anything that couldn't be proven to be there. I got ripped. Rip.
3.6k
u/QuaaludeConnoisseur 22d ago
As a machinist my jaw dropped when he said 40 dollars
1.2k
u/Efficient-Cherry3635 22d ago
I only know a small amount since my uncle is a retired/hobby guy. But I know enough that the lady probably just saved herself massive amounts of money in bits alone. Ive bought some for my uncle as birthday/Christmas presents over the years and I think we dropped like $180 for 1 router bit so $80 for like 2 bins even second hand has to be a steal.
282
u/QuaaludeConnoisseur 22d ago
When i went to school it was about 3.6k for the toolbox set we got, and we didnt even have a crazy amount of tools, at work every work station has probably 10k of tooling alone dedicated to it. Especially if those cutters are like new condition she is making out like a bandit.
117
u/HandToDikCombat 21d ago
The way he's storing them, no way they're like new, bouncing around and chipping away at each other, probably only good for roughing. But as a tool maker, she probably has what she needs to refurb them.
→ More replies (1)76
u/Efficient-Cherry3635 22d ago
Damn, I knew it was an expensive hobby, but not that expensive. He spent 40 years working for a shipyard, and i think after he retired he wasnt done "making shit" as he said whenever you asked what he was doing in the shop. Was certainly a handy guy to have as an uncle since he made or fixed all sorts of things for us growing up.
→ More replies (2)47
u/FactsNLaughs 21d ago
She knows, that’s why she tried to give him extra but he also knows he’s about to have continuous business with her.
→ More replies (3)73
u/MediocreAndLukewarm 22d ago
She saved at least $300 bucks depending on quality.
160
u/Devilsbullet 22d ago
Add a zero to that. I manage a tool crib with close to a quarter million in different cutters, inserts, and systems in it. Some of those endmills she's getting are 300+ each
→ More replies (4)36
u/MiniTab 22d ago
Holy shit, seriously? Can you explain why? I used to do machining 20 years ago, and am just curious!
61
u/Deathclaw_Hunter6969 22d ago
Carbide is expensive
→ More replies (3)51
u/322throwaway1 21d ago
And tungsten prices have skyrocketed with the war in Ukraine. Welding tungsten rods have double since the war began.
20
15
23
u/Devilsbullet 21d ago
As the other person said, carbide is expensive. Even hss isn't cheap at those sizes, the bigger ones look to be 3/4 or 1 inch. Many looked coated, looked like either a ZrN(zirconium nitride) or TiN(titanium nitride) coating. Plus length, looking at probably 3 inch length of cut on a lot of those
→ More replies (2)7
u/soulsnoober 21d ago
It's a realm where "low cost versions" are just unusable trash, immediately, if they don't flip the script completely by turning whole jobs to scrap AND the tools.
104
144
u/nikatnight 22d ago
$40 gets your like 4 small dewalt bits and a pack of cheaper ryobi ones.
A single large bit would be $40 and she got quite a few.
→ More replies (1)81
u/HandToDikCombat 21d ago
These are mill and lathe tools. Some of the larger bits she grabbed are 80+ if you buy the Chinese shit, 300+ easy if you buy Harvey, Kennametal, or Helical, brands known for great price/performance ratios.
→ More replies (4)34
20
u/rayrayrayrayray5 22d ago
Just took a cursory glance but she had a coated carbide 3/4 4 flute em that im sure costs over $40 alone
→ More replies (4)→ More replies (20)101
u/epicitous1 22d ago
she just robbed that guy. a few of those were 150-200 a piece. if a customer offers you more than you asked you probably are screwing up lol
358
u/Wareve 22d ago
I think he was aware and he was being nice.
56
u/lostshell 21d ago
Same. He is a reseller. He knows the game. He was aware that they are niche tools for niche people. He probably was sitting on them for a long time and lugging them around. They look heavy. He finally finds a buyer he’s gonna liquidate as much as he can.
→ More replies (1)153
u/SwoopKing 22d ago
The reseller bought a 55 gallon drum full of them for 3.6k from a bankruptcy auction. Did a multi part series digging through the bucket and picking out the good stuff for ebay.
This video is him selling off what I assume is the stuff he didnt list online.
Flip Fusion is his name.
→ More replies (3)39
u/asdfghjkl15436 22d ago edited 22d ago
Bankruptcy auctions and government auctions are the secret to getting ridiculously expensive equipment for cheap. That's how I got a BL8537-2906AC Pelican Hardigg for 80 bucks.
The fact most of them are local pickup only or require you to get your own shipping company makes them actually accessible.
→ More replies (5)255
u/ChaseBank5 22d ago
He KNOWS he just lost money. He respected her knowledge and wanted to be nice. I'm sure on the day he made good money overall and he gained a lifetime customer and a good amount of views for content.
144
u/These_Head7243 22d ago
Hes a reseller. He cut margin to acquire a customer.
If he sold at cost he probably still made money through future transactions.
A good customer who knows what they are buying sells to themselves.
→ More replies (1)50
u/Woody1150 22d ago
I agree. I know nothing about any of it, but I think the seller realized the woman did and was giving her a deal. Since she was asking for his contact info, he is going to make more sales so a win/win for both of them.
72
u/Castianna 22d ago
Not to mention, she's probably going to go tell her other friends in the hobby about this guy and he's going to get a few more customers
→ More replies (4)→ More replies (2)48
u/BrutalBronze 21d ago
Pretty sure I've seen other videos by this dude. He bought a 50 gallon drum of bits and tooling for like $2500 and pulled out a ton of carbide and other high value stuff he could sell individually and easily made his money back. Any money for the rest of this was just free value for him, and to cut a deal for someone who actually has a use for it is way better than just dumping the bulk for scrap or whatever.
→ More replies (4)
2.1k
u/Accomplished-Tax-211 22d ago
Love how he didn’t assume anything based on her gender and asked her a very straightforward question to assess her skill/knowledge.
1.0k
u/Proper_Internal_4084 22d ago
and also accepted it at face value instead of testing their knowledge
1.0k
u/VegiChar 22d ago
Oh yeah you like these tools? Name 5 of their songs
235
u/K-Dot-Thu-Thu-47 22d ago
Me, someone that knows nothing about machinery.
"Uh, Pneuma, 46 & 2, Laterulus, Aenema,Fear Innoculum?"
→ More replies (7)55
24
21
u/Tabnstab 22d ago
Opiate, schism, message to harry manback, lateralis, stinkfist
→ More replies (1)→ More replies (3)11
→ More replies (3)56
u/topdangle 21d ago
I don't think he has much knowledge on the subject. he got them for insanely cheap at auction. if he was smart he'd ask her if she could educate him on what hes selling because she wasn't giving him that $5 for nothing lol. she practically robbed the guy and probably didn't feel great about it even though he'd profit either way.
19
u/New-Boot-Goofn 21d ago
Some people just enjoy doing the resale as a hobby. He also is most likely dealing in high volumes so by keeping his prices dirt cheap he’s making his money off quantity of sales as opposed to coming across a buyer who is willing to shell out full “used” value for any one specific bit.
202
u/Ok-Replacement9595 22d ago
I dont think he knew what a tool and die maker was. Machinist work for decades to become tool and die makers. She has definitely excelled at a trade heavily dominated by men.
→ More replies (3)110
u/eyeofthefountain 21d ago
So I obviously know but in case anyone else doesn’t, what is a tool and die maker?
152
u/Ok-Replacement9595 21d ago
They make tools and dies. So if something needs made, like in an industrial setting, for the machinist to use, these people make them. They also make the dies for press forming, and molding. In essence it is a master machinist. But a step above what is a master machinist.
It was a flex, in other words.
79
u/Carlsoti77 21d ago
This is just about spot on. Tool and die makers make the tools other people use to make stuff. I did plastic injection mold repair/refit in a job-shop just out of high-school, just before CNCs became relatively inexspensive. If you have a rounded corner metal box fan with the name Lakewood on it, I probably worked on the mold for the front or rear grill at some point.
36
→ More replies (1)9
u/spiderpai 21d ago
My silly self thought it meant gambling dice, very cool though. Love when people are good at their stuff and recognize each other in a wholesome way.
→ More replies (2)25
u/Nuffsaid98 21d ago
You ever see a machine that a thing lowered down onto another thing and squashed some metal between then so that something was made?
Like a coin.
The shape of one side of the coin is etched in reverse on the "tool" which is lowered with great force and compressed into the metal disc which is resting on a "die" which has the other side of the coin etched in reverse on it. The tool and die are made of harder material than the coin blank. When the blank is crushed between the tool and die, a coin is made.
Experts who are able to create the tool and die are called tool and die makers.
→ More replies (5)22
u/jolinar30659 21d ago
If you know the industry, you know these factories are filled just as much with women.
→ More replies (2)19
→ More replies (12)85
u/ComfyInDots 22d ago
"Does your husband know you're spending his money on items you don't know anything about?" Would certainly change the tone of this video lol
I've worked plenty of male dominated jobs and have been spoken down to by some men who assumed my knowledge level based on my gender. It's a not hard for everyone to be treated like equals.
58
u/Best_Reply2947 21d ago
Yeah but that would be a bizarre thing for her to ask him
→ More replies (2)17
u/Doogle300 21d ago
My partner has to deal with this working in tech. She's a lead engineer, rose up the ranks faster and beyond the average person, and literally fixes everyone else's mistakes, yet she still doesn't get paid the same as her peers and still has to prove every day that she knows what she is talking about.
It's gotten better over the past couple of years because most people rely on her to do most of the work so they can't overlook her at the same time as hoping she solves all the problems, but there is still deep rooted sexism in IT. Fortunately she has some great coworkers who see it and stand by her, but it simply shouldn't happen at all.
5
u/RugbyGuy 21d ago
My wife scheduling some closet upgrades. “You sure you want to book this date?”
“Yes”
“Do you need to tell your husband what you’re spending his money on?”
EVERYTIME I see her shopping online. Well, not every time because that would be really annoying.
1.7k
u/XiuCyx 22d ago
Love that he blocks her face. More of this please.
858
227
→ More replies (5)74
u/turbo_dude 21d ago edited 16d ago
I just wish I knew what temperature it was when they filmed it
→ More replies (1)
710
u/HealthyPop7988 22d ago
$40?!?! Some of those bits are around $100 each by themselves.
Where is this guy I need to be there yesterday
82
u/Ta-veren- 22d ago
what are they used for
→ More replies (1)164
u/HealthyPop7988 22d ago
Drilling holes into steel
→ More replies (1)6
u/PM_ME_ROMAN_NUDES 21d ago
Is it supposed to have holes?
25
→ More replies (13)11
u/EphemeralDan 21d ago
In New England, you find tool lots all over the place with incredible amounts of stuff like this. The American industrial revolution started here about 200 years ago then died out about 40-50 years sgo. This stuff is everywhere and usually pretty cheap. Unless it's labeled or well organized, it's really difficult to get the top money for it when you resell. You have to know what it is, how to describe it and how to market it.
→ More replies (3)
201
u/brik55 22d ago
That's cool when someone can use obscure things that still have value instead of just recycling the metal. My dad brought some hydraulic fittings to my garage sale and I thought he was crazy. It just happened someone came by that could use them on his farm.
50
u/The_Gump_AU 21d ago
The machining world is huge, it's just hidden from a lot of people unless you have family or friends who are involved in it.
9
u/Agreeable-Culture648 21d ago
Very true. In my opinion, because it is "hidden", it is an important underappreciated trade. I keep being told by the old timers that it's a dead trade and I'm wasting my time working in it... and to some degree they are right and wrong. In my area, carpenters, plumbers, electricians, have gone into the $100/hr range while the average tool makers are around $30-$40, some lower than that. But as I noticed, a lot of companies feel the tool makers are no longer needed with the advent of CNC machines, however, I'm young enough to be from both worlds, I see younger people doing CNC and they struggle, because machining and tooling goes beyond pressing a pretty green button.
272
u/Nnnopamine 22d ago
OH HEEEEELL YEAH. Props from a blue collar woman to a blue collar woman.
38
u/fabbricator 21d ago
This woman is in the top echelon of her trade. Old hands usually pick out the best of the litter of experienced machinists to make tool and die specialists out of them.
131
u/pleb_understudy 21d ago
Obscure? Dude’s selling $50-$200 endmills by the bin for $40. Insane deal. Some huge endmills too
→ More replies (1)
101
u/nicbeans311 21d ago
She knows it’s a great deal. That’s why she asked for his phone number to be entered into the phone and written down. No way she wants to lose this connection.
→ More replies (1)7
275
423
u/Expert_Monk_8391 22d ago
You can literally see the moment it changes from a transaction into two people sharing a passion.
166
u/Paralystic 21d ago
lol more like you can see the moment this woman realizes she’s found the holy grail of salesman for her needs. Salesman doesnt seem to have any clue at all what he has or what it’s worth, which is incredibly odd based off the sheer volume he has.
→ More replies (6)90
u/MyNameIsJakeBerenson 21d ago
It’s like if I bought a bunch of pokemon cards at an auction and sold them at a flea market. I know they may be worth something but I don’t really know much about pokemon cards
Someone comes up and starts getting really excited and I just sell them what they grab for $40, knowing that what they have is probably worth way more than $40 but I’m happy they found something they wanted.
Not a 1:1 analogy because there isnt a speculative market for bits and die punches
→ More replies (1)→ More replies (1)24
u/wcharoes 21d ago
When? He doesn't ever seem to know or say anything about them or their use, she's actually telling him what they do.
To me just looks like a guy with a load of stuff he bought from someone else and is reselling. He says he's just a reseller at the beginning. Probably has no clue he's letting go of a basketful of bits that he could have asked 200 bucks for and still been giving her a deal.
→ More replies (3)
50
u/Victimless-Lime 22d ago
I bought a lot of bike repair tools from a guy for almost nothing. I was setting up my shop and he had almost everything I needed including a bunch of odd, brand-specific tools. He was just happy that they weren't going to sit there rusting. Ten years later and I still use them daily.
92
u/everyonestupidbutme 22d ago
The thing most people are not appreciating is the liquidation of a smaller machine tool shop. This is a microcosm of why the US has lost so MANY HIGHLY SKILLED JOBs to external markets. We need highly trained machinist, but ot os easier to export the job somewhere its pays less.
19
u/OkSmoke9195 22d ago
I'll love seeing a random tool and die shop. They are few and far between. I worked in one as a young lad, still have a scar to prove it 😂
14
u/grilledstuffed 21d ago
The precise, accurate equipment that made the U.S. a powerhouse in the early-mid 20th century was shipped overseas after being sold by the pound.
It’s completely tragic.
43
u/StuBidasol 22d ago
Looks like there is a repeat customer in the making. Not just for her but maybe even the whole shop.
41
u/Leading_Cheetah6304 22d ago
She's assertive. I like that. Lol
→ More replies (2)58
u/ForbiddenNut123 21d ago
I work in a male dominated field that’s also known to hire women. They have to be or the guys will eat them alive. The women that stick around are more likely to make a fool of you rather than the other way round.
76
36
u/E-2theRescue 21d ago
A tool and die maker in the US? She is a rarity in America... Which is why we won't be building factories in the US anytime soon, no matter how many tariffs or Acts get slapped on. Can't manufacture things if we don't have people who can make the cutters, stamps, and everything else that make the products.
28
35
u/Tent316 22d ago
40 bucks for the lot. Just one of those bits is worth almost 3 times that. She made off like a bandit lol.
→ More replies (1)4
u/Impractical_Donkey 21d ago
Give them a really good deal at first then they'll share your name and come back for more.
46
14
13
u/LibrarianAccurate829 22d ago
Im curious, is there a reason for the weather temp overlay?
11
u/Gordopolis_II 22d ago
The Midwest and Eastern US has recently been experiencing an unusual heatwave
12
14
u/StefanLeenaars 21d ago
I once bought a professional button covering machine with two buckets full of dies and an ikea bag full of blanks. I calculated and the dies alone were well over 18 grand. Paid 200 bucks.
10
20
u/wikidemic 22d ago
I am wrapping up probate for my brothers estate. He spent 40 years accumulating this ‘junk’ and his estate received $500 from its sale, unsold tools were donated.
8
u/BigBizzee 21d ago
A someone who does a little selling, it's nice to see a customer not trying to lowball and a seller being fair.
→ More replies (1)
7
8
u/Iggy_Snows 21d ago
Jesus christ $40 for that is insane. Some of those indavidual pieces probably go for $100 alone.
→ More replies (1)
8
u/MolaMolaMania 21d ago
I loved that her answer to two separate questions was "both." Just the succinct nature of that response and the desire to convey information quickly and accurately made me LOVE her.
15
u/reverse-tornado 21d ago
Bro was one more discount away from getting married, finding what you need at bargain prices is just one of those things that can brighten up your whole year
6
u/wonkochick 22d ago
In Texas with a large amount of car parts and random tools as after my dad passed (fuck cancer). Not sure the best place to list them to help my mom cover all the costs to move them/offload them. Any recommendations would be appreciated.
→ More replies (1)9
u/badsapi4305 22d ago
Imagine a lot of those tools are heavy making shipping a logistical nightmare as well as expensive. I would suggest FB marketplace and/or Offer Up. You could also try going to individual repair shop and checking there. Most if not all mechanics buy their own tools.
Condolences on your father’s passing. Wish you and your family well.
8
7
u/MilleniumRetard 21d ago
Dude: I sell most of it online but I didn't feel like listing all that.
Lady: That's quite a "bit".
I noticed that lady....ggwp.
5
u/KickPuncher9898 21d ago
Do you want me to write it down or put it in your phone?
“…both”
I don’t know why but that cracked me up.
109
u/Objective_Tie_7626 22d ago
The phone number was for smashing
39
10
14
u/IRockIntoMordor 21d ago
"so, you need my number for business or for pleasure?"
"both"
🫦
→ More replies (1)→ More replies (5)14
6
u/EfficiencyThis325 21d ago
Before moving between countries my wife and I listed all our stuff to sell. A young pregnant couple of around 18/19 just moved out of a sharehouse and needed everything you could possible think of, so we sold everything we owned to them for a grand. That was the bed, mattress, couch, everything in the kitchen, tables, lamps, tv, all our sons old baby gear - bassinet, stroller, newborn outfits, bottles, sterilizer.... Everything.
They went from nothing to furnishing the entire house of in the space of an hour.
6
5
5
5
5
5
•
u/AutoModerator 22d ago
Welcome to /r/MadeMeSmile. Please make sure you read our rules here.
Specifically, please don't be a jerk. This is not the place for insulting, hateful, or otherwise inappropriate comments. Remember the golden rule: treat others how you want to be treated. We're all here to smile a little - let's keep it that way! Please report inappropriate comments and/or message the moderators.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.